Dear All, Clause 8.1 of EN 61000-4-2 calls for table-top equipment to be placed on an insulating support 0.5 mm thick. Can anybody recommend a suitable material (and UK based supplier if possible)? It would be nice if it was reasonably immune to tearing.
I've looked in RS and Farnell and their plastics materials all seem to be too thick. Does this matter? Many thanks Ian Unwin Servomex Group Limited, Jarvis Brook, Crowborough, East Sussex, TN6 3DU, England. e-mail: [email protected] Company Registered in England: No.2170458 VAT No.: GB 522 6077 63 Register now at http://www.servomex.com/zap.html for an opportunity to win a great prize in our quarterly draw. This email has been scanned for all viruses by the MessageLabs and contains information from Servomex which may be privileged or confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us immediately. Servomex may, as part of its normal activities, monitor, edit or censor the content of any information and software, transmitted through, or stored on, its facilities. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
