In message <ca5c7dd4.bcf25%[email protected]>, dated Mon, 1 Aug 2011, Ken Javor <[email protected]> writes:
>Understood that the wire insulation type might be covered by safety >standards, PVC is allowed but safety standards are now allowing 'equivalent performance materials that are more ecologically acceptable. >but as to wire gauge and ampacity, what issue is there besides >potential drop down the cable and short circuit current? Flexibility! The user will not thank you for a cable on which you can support the product in cantilever mode! -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK When I point to a star, please look at the star, not my finger. The star will be more interesting. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
