I can’t suggest a specific model number, but did you try Solar Electronics at:
http://www.solar-emc.com/ Ed Price [email protected] <blocked::mailto:[email protected]> WB6WSN NARTE Certified EMC Engineer Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 Military & Avionics EMC Is Our Specialty > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Reginald > Henry > Sent: Thursday, May 19, 2011 8:07 AM > To: [email protected] > Subject: Need assitance in finding a manufacturer : 1:1 ISOLATION TRANFORMER > for use as Lab Equipment while performing EN 61000 testing > > My initial posting resulting in information that lead me > To a dead end , regarding securing an Isolation Transformer. > > Can anyone else supply me with a lead to a manufacturer ? > > See below... > > Thanks again, > Reg > > -----Original Message----- > From: Reginald Henry > Sent: Wednesday, May 18, 2011 3:58 PM > To: [email protected] > Subject: 1:1 ISOLATION TRANFORMER for use as Lab Equipment while > performing EN 61000 testing > > Hello All, > > Can anyone supply me with information as to where > I can purchase Isolation Transformer for use in the lab. > > While performing the some of the impulse surge testing > I need to have confident that none of the testing characteristic/impulse > surges are > Being fed back on to the 230v main. (wattage is <<10 watts ) > > I need to isolate the test equipment as well as the EUT from the mains > > Please send info off line directly to me. > > Thanking you in advance for your valuable information. > > Best Regards, > Reg Henry > > Reginald Henry > Electrical Engineer > > Compliance Engineering > Tel: (631) 952-2288 Ext: 310 > > > > > > > > > CONFIDENTIALITY NOTICE: This transmission may contain information that is > privileged, confidential and/or exempt > from disclosure under applicable law. If you are not the intended recipient, you are > hereby notified that any > disclosure, copying, distribution, or use of the information contained herein > (including any reliance thereof)is > strictly prohibited. If you receive this transmission in error, please immediately > contact the sender and destroy > the material in it's entirety,whether in electronic or hard copy format. The views > expressed in this communication > may not necessarily be the views held by the company. > Thank you. > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to <emc- > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://product-compliance.oc.ieee.org/ > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
