OR is it that you have to keep the power cord off the floor by 30cm? That can make sense in wet locations. How is this to be done?
Are you talking about the location of the receptacle your device will plug into or where your power cord comes out the back of your product? The Other Brian ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Goedderz, Jim Sent: Wednesday, December 15, 2010 12:10 PM To: [email protected] Subject: Power line connections Group, After the installation of a new product in Italy, we are being told that there is a technical detail that appears not in line with the official recommendation of the European Community. The power line MUST be located at a minimum of 30 cm up from the floor. Can anyone provide substantiation of the 30mm claim? Providing the source would also be a big plus. Even “I am not aware of that” answers would be helpful. (Privately if desired). Thank you. James Goedderz Product Safety Engineer Tyco/Sensormatic [email protected] _________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
