In message <of71fb0281.9dcde4a8-on882577c4.00539007-882577c4.00550...@selinc.com>, dated Fri, 22 Oct 2010, [email protected] writes:
>I did a bit of reading, and found out that some TIG welders use a high >frequency, high power burst (almost like a Tesla coil) to start the >arc. Sounds pretty nasty to me. Very like a Tesla coil in fact! IEC 60974-10 (2007-08) Ed. 2.0 Bilingual English and French Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK If at first you don't succeed, delegate. But I support unbloated email http://www.asciiribbon.org/ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
