For equipment under EN/UL 60065, when a customer product comes back for repair and after the repair is complete, is there any requirement that the unit have hi pot and ground continuity done before returning it to the customer? These are Class I products requiring a Protective Earth connection. If there is a requirement, can you point me to the specific reference?
Thanks in advance for any and all comments. Best regards, Scott Douglas sdoug...@ptcnh.net - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc