I'm curious about the effect of using a gold (or silver) loaded epoxy to bond a connector shell to a chassis box. If I measured a bond resistance of about 1 Ohm from the connector shell to the chassis, how could I estimate the degradation in shielding effectiveness (frequency range of interest is about 10 kHz to 5 MHz)? Maybe this has been thoroughly covered in some past Symposium papers. Can anyone give me a hint about where to look? Of course, absolutely definitive answers, which allow me to remain lazy, are also quite acceptable. Thanks in advance! Ed Price [email protected] <mailto:[email protected]> WB6WSN NARTE Certified EMC Engineer & Technician Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 (Voice) 858-505-1583 (FAX) Military & Avionics EMC Is Our Specialty - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
