Never mind. I mess up the definition/translation of cell and batteries. My fault.
On 10/24/08, Grace Lin <[email protected]> wrote: Dear Members, Can someone confirm the following "Cell and battery designation" under 5.1 of IEC 61960: 2003? "Battery shall be designated with the following form: N 1 A1 A2 A3 N2 / N3 / N4 – N5 Cells shall be designated with the following form: A 1 A2 A3 N2 / N3 / N4 " The Japanes JIS C8711: 2006 standard has the following designation: "Battery shall be designated with the following form: A1 A2 A3 N2 / N3 / N4 Cells shall be designated with the following form: N1 A1 A2 A3 N2 / N3 / N4 –N5 " Do I miss any amendment or correction to either standard? Thank you and look forward to your help. Best regards, Grace - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
