Grace
I believe that the PSE marking requirement is for Li-ion batteries with power density greater than 400 wh/liter. This applies to consumer type of Li-ion. Industrial/professional products are exempt. Regards, Denis Ryskamp Environmental Compliance Manager Trimble Dayton 5475 Kellenburger Road Dayton, Ohio 45424 *: 01-937-245-5539 *: [email protected] ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Leber Jody-G19980 Sent: Tuesday, October 28, 2008 6:49 AM To: Grace Lin; [email protected] Subject: RE: Cell and Battery Designation in IEC 61960 Grace, It is the circle mark as the lithium battry is unspecified. Best Regards, Jody Leber Program Manager [email protected] http://www.motorola.com/producttesting blocked::http://www.motorola.com/producttesting> Motorola Product Testing Services 1700 Belle Meade Court Lawrenceville, GA 30043 770.338.3581 P 404.387.1224 C 847.761.3145 F ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Grace Lin Sent: Monday, October 27, 2008 3:18 PM To: [email protected] Subject: Re: Cell and Battery Designation in IEC 61960 Hi John, Thank you very much. We have several different types of batteries. Lithium battery is one of them. I believe the Japanese requirement starting November 20, 2008 is for the lithium battery. I assume the PSE mark required is the diamond one (not circle one). Please confirm. Best regards, Grace On 10/27/08, Tyra, John <[email protected]> wrote: Hello Grace, If it is a Lithium battery then it does require a (PS)E mark by November 10th …………what type of battery do you have? From: [email protected] [mailto:[email protected]] On Behalf Of Grace Lin Sent: Friday, October 24, 2008 2:05 PM To: [email protected] Subject: Re: Cell and Battery Designation in IEC 61960 Thank you, Jody. Do you know if PSE mark is required per Japan for the battery? On 10/24/08, Leber Jody-G19980 <[email protected]> wrote: Grace, N5 represents the number of parallel connected cells indicating it belongs to the battery designation. Best Regards, Jody Leber Program Manager [email protected] http://www.motorola.com/producttesting Motorola Product Testing Services 1700 Belle Meade Court Lawrenceville, GA 30043 770.338.3581 P 404.387.1224 C 847.761.3145 F ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Grace Lin Sent: Friday, October 24, 2008 10:21 AM To: [email protected] Subject: Cell and Battery Designation in IEC 61960 Dear Members, Can someone confirm the following "Cell and battery designation" under 5.1 of IEC 61960: 2003? "Battery shall be designated with the following form: N 1 A1 A2 A3 N2 / N3 / N4 – N5 Cells shall be designated with the following form: A 1 A2 A3 N2 / N3 / N4 " The Japanes JIS C8711: 2006 standard has the following designation: "Battery shall be designated with the following form: A1 A2 A3 N2 / N3 / N4 Cells shall be designated with the following form: N1 A1 A2 A3 N2 / N3 / N4 –N5 " Do I miss any amendment or correction to either standard? Thank you and look forward to your help. Best regards, Grace - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
