All: EN 300 386 V1.4.1 (04-2008) Electromagnetic compatibility and radio spectrum matters (ERM) — Telecommunication network equipment — Electromagnetic compatibility (EMC) requirements is missing from the list.
This ETSI standard list the following dates (I hope this copied table passes without corruption!): National transposition dates Date of adoption of this EN: 11 April 2008 Date of latest announcement of this EN (doa): 31 July 2008 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2009 Date of withdrawal of any conflicting National Standard (dow): 31 July 2011 Based on the dates above, should this one have been listed, eventually superseding v1.2.1, v1.3.1, v1.3.2, and v1.3.3 (all supposedly still simultaneously valid)? Is EN 300 386 V1.4.1 usable as a Harmonized Standard giving a presumption of conformity, or wait until published? William T. Sykes Compliance Engineer Motorola Home & Networks Mobility 101 Tournament Drive Horsham, PA 19044 215-323-2619 [email protected] ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Ralph McDiarmid Sent: Wednesday, November 05, 2008 1:13 PM To: [email protected] Subject: FW: New Official Journal list of EMC standards EN50178:1997 is missing from this list. Has it been superseded, or is it now a rogue standard? Ralph McDiarmid, AScT Compliance Engineering Group Xantrex Technology Inc. From: [email protected] [mailto:[email protected]] On Behalf Of Brian Jones Sent: Wednesday, November 05, 2008 1:23 AM To: [email protected] Subject: New Official Journal list of EMC standards Everyone A new list of harmonised standards for 2004/108/EC was published in the OJ on 4 November. It may be downloaded from here http://eur-lex.europa.eu/LexUriServ/Lex riServ.do?uri=OJ:C:2008:280:0014:0032:EN:PDF You will see that A1 to EN 55022:2006 has been listed. It may be used now, but does not have to be applied until 1 October 2010. Best wishes Brian Brian Jones EMC Consultant - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
