EN 300 386 is not, and has never has been, listed in the R&TTE OJ. The R&TTE
OJ dated June 3, 2008 jumps from EN 300 373-3 to EN 300 390-2.
As Kris stated below, the scope of EN 300 386 is for Telecommunications
Network Equipment (TNE), not Telecommunications Terminal Equipment (TTE).
Additionally, from the EN 300386 v1.4.1 Foreword, "The present document is
intended to become a Harmonized Standard, the reference of which will be
published in the Official Journal of the European Communities referencing the
Council Directive on the approximation of the laws of the Member States
relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC
[49] as amended and 2004/108/EC [52])."
Therefore, EN 300 386 is not intended for the R&TTE Directive.
Which still begs the question, why are EN 300 386 versions v1.2.1, v1.3.1,
v1.3.2, and v1.3.3 still listed in the EMC OJ as simultaneously valid
standards, while v1.4.1, "adopted" in April 2008, and supposedly has a “Date
of latest announcement of this EN (doa)” of 31 July 2008, not listed in an
EMC OJ published in November 2008?
William T. Sykes
Compliance Engineer
Motorola Home & Networks Mobility
101 Tournament Drive
Horsham, PA 19044
215-323-2619
[email protected]
________________________________
From: Pearson, John [mailto:[email protected]]
Sent: Thursday, November 06, 2008 8:02 AM
To: Carpentier Kristiaan; Barker, Neil; SYKES WILLIAM T-WRQ876;
[email protected]
Subject: RE: EN 300386 - RE: New Official Journal list of EMC standards
There is equipment that is both
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of Carpentier
Kristiaan
Sent: 06 November 2008 13:00
To: Barker, Neil; SYKES WILLIAM T-WRQ876; [email protected]
Subject: RE: EN 300386 - RE: New Official Journal list of EMC standards
Neil,
This question has been raised a few times in the past years: 300386 excludes
terminal equipment beyond the NTP (ref. scope)
Kind regards,
Kris Carpentier
Regulatory & Approvals
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of Barker, Neil
Sent: donderdag 6 november 2008 12:04
To: 'SYKES WILLIAM T-WRQ876'; [email protected]
Subject: RE: EN 300386 - RE: New Official Journal list of EMC standards
William
I would expect that this standard is listed under the R&TTE Directive, not the
EMC Directive, even though it is an EMC standard; it is primarily an R&TTE
standard.
Neil Barker
Manager
Central Quality
e2v
106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, England
Tel: +44 (0)1245 453616
Mobile: +44 (0)7801 723735
Fax: +44 (0)1245 453571
www.e2v.com <http://www.e2v.com/>
P Consider the environment: do you really need to print this e mail?
________________________________
From: SYKES WILLIAM T-WRQ876 [mailto:[email protected]]
Sent: 05 November 2008 18:36
To: [email protected]
Subject: EN 300386 - RE: New Official Journal list of EMC standards
All:
EN 300 386 V1.4.1 (04-2008) Electromagnetic compatibility and radio spectrum
matters (ERM) — Telecommunication network equipment — Electromagnetic
compatibility (EMC) requirements is missing from the list.
This ETSI standard list the following dates (I hope this copied table passes
without corruption!):
National transposition dates
Date of adoption of this EN:
11 April 2008
Date of latest announcement of this EN (doa):
31 July 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e):
31 January 2009
Date of withdrawal of any conflicting National Standard (dow):
31 July 2011
Based on the dates above, should this one have been listed, eventually
superseding v1.2.1, v1.3.1, v1.3.2, and v1.3.3 (all supposedly still
simultaneously valid)?
Is EN 300 386 V1.4.1 usable as a Harmonized Standard giving a presumption of
conformity, or wait until published?
William T. Sykes
Compliance Engineer
Motorola Home & Networks Mobility
101 Tournament Drive
Horsham, PA 19044
215-323-2619
[email protected]
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of Ralph McDiarmid
Sent: Wednesday, November 05, 2008 1:13 PM
To: [email protected]
Subject: FW: New Official Journal list of EMC standards
EN50178:1997 is missing from this list. Has it been superseded, or is it
now a rogue standard?
Ralph McDiarmid, AScT
Compliance Engineering Group
Xantrex Technology Inc.
From: [email protected] [mailto:[email protected]] On Behalf Of Brian Jones
Sent: Wednesday, November 05, 2008 1:23 AM
To: [email protected]
Subject: New Official Journal list of EMC standards
Everyone
A new list of harmonised standards for 2004/108/EC was published in the OJ on
4 November. It may be downloaded from here
http://eur-lex.europa.eu/LexUriServ/Lex
riServ.do?uri=OJ:C:2008:280:0014:0032:EN:PDF
You will see that A1 to EN 55022:2006 has been listed. It may be used now,
but does not have to be applied until 1 October 2010.
Best wishes
Brian
Brian Jones
EMC Consultant
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
Sent by E2V TECHNOLOGIES PLC or a member of the E2V group of companies. A
company registered in England and Wales.
Company number; 04439718.
Registered address; 106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, UK.
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
