Not quite what you need to know but I've used signal taps or directional couplers with a 'scope to watch the RF waveform and set modulation depth, and a calibrated counter, or even a receiver or analyzer will for frequency. One always has recourse to calibrated devices to monitor another, uncalibrated one. It's a good idea anyway! If a detector must be used whose linearity is unknown, one can use calibrated attenuators to find out.
Cortland Richmond KA5S > [Original Message] > From: Wendy Nya <[email protected]> > To: <[email protected]> > Date: 8/10/2010 4:23:29 AM > Subject: Calibration supplier for signal generator with pulse modulation > > Dear All, > > I am looking for a calibration supplier that can provide accredited service for > AR SG6000. It has built-in pulse modulation option (for Radiated Immunity use). > > By the way - Is anyone using this model? It seems to be OEM from Agilent (it > came in an agilent box) but the equipment is marked AR > and works with Agilent N5181A driver. Agilent is saying that it is not able to > provide accredited calibration service for this model. > > Thanks & Regards, > Wendy Nya > > > > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
