Hi Gary,
I deal a lot with battery pack, both in ATEX and Pollution Degree 2 and 3. Here is what I use: IEC 62133 is the standard used for batteries in portable consumer electronics. IEC 62133 is a standard used worldwide except in USA. In USA, UL 1642 and UL 2054 are the equivalent standards UL 1642 is for ONLY the CELL and UL 2054 is used for the complete battery pack. Hope this helps. Ron Baugh From: [email protected] [mailto:[email protected]] On Behalf Of McInturff, Gary Sent: Wednesday, May 26, 2010 1:07 PM To: [email protected] Subject: Lithium Ion Batteries Is there a Harmonized standard for Lithium batteries in the EU. For UL and the US Battery Cells would fall under UL 1642-Lithium Batteries. If there will also be a Battery Pack involved that it would also be UL 2054. Of Course now I’m confused what is the difference between a Lithium Battery and a battery Pack. I’m missing the obvious I suppose but I understand there might be requirements on the cell – but isn’t a pack nothing more than a series of cells? Do battery packs incorporate safety circuits – I would presume that whether one or more battery I would have to design a circuit that safely charges, discharges, protects against over voltage, and maybe a temperature monitoring circuit etc – but again I would presume if I do that for one cell I can scale for cells that have been shrink wrapped into a pack. I;m trying to get the scope for both of these documents but stumbling Gary McInturff Reliability/Compliance Engineer Advanced Input Systems Esterline Corporation 600 West Wilbur Avenue Coeur d' Alene, Idaho 83815 Tel: 208 635 8306 Fax 208 635 8706 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
