In message <447832500.19099111272660586812.javamail.r...@sz0149a.emeryville.ca.mail. comcast.net>, [email protected] writes >Thanks for all the inputs so far. I have confirmed with the vendor of >the metal fabric that they do not recommend it for removable use, due >to long-term reliability. Therefore the only option that might work >seems to be using solid metal panels.
What about wire netting/wire mesh? I suppose the normal steel wire stuff would have too much resistance, but, at much higher cost, you can get mesh in other metals. I think hinges would not work well after a while. -- This is my travelling signature, adding no superfluous mass. John M Woodgate - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
