We’re doing an IPX6 test (high pressure water jet) according to IEC60529.
Some water enter the unit, but drain holes make their job. Only plastic enclose in that area anyway. But, a few drops are discovered on a plastic material switch inside the unit and also some drops on two connection poles on the swicth. We have failed on this test because (according to the test lab) in the long term, creepage currents can cause the two poles to be shorted and thereafter a incorrect function will appear. Is it likely to believe that such creepage currents can occur, when the two poles are placed 10mm from each other and the voltage supply is 3.3VDC? b.r. Amund - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
