In message <78eac2d97114034eb62aaa10fcc251060a71d...@usa7061ms01.na.xerox.net>, dated Wed, 23 Sep 2009, "Spencer, David H" <[email protected]> writes:
>From EN55022:2006 +A1: 2007 > >Section 9.5.2 Tabletop equipment arrangement > > >2) "...........(for example on an open area test site (OATS) or in a >screened enclosure). The EUT shall be placed on a non-conductive table >such that it is 0,4m above the horizontal ground reference plane." > Citing the standard, with date and with applicable amendment. Citing the clause (IEC-speak for a numbered division) and the item within it. Oh, if only everyone would do that! Have an award! (;-) -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Things can always get better. But that's not the only option. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
