If the inspector is not trained and documented as trained, they cannot enter the inner dangerous parts of the lab. Or they have to wait until the lab is made safe for them. You can't let just anybody into the hazardous areas.
- Bill Indecision may or may not be the problem. --- On Thu, 7/30/09, John Woodgate <[email protected]> wrote: From: John Woodgate <[email protected]> Subject: Re: Workplace Safety Rules To: [email protected] Date: Thursday, July 30, 2009, 4:10 PM In message <E4C83436DF3D724A8D70992643 [email protected] <http://us.mc396.mail.yahoo.com/mc/comp se?to=e4c83436df3d724a8d70992643ee9d6203e42...@susday7659.td.teradata.com> >, dated Thu, 30 Jul 2009, "Flavin, John" <[email protected] <http://us.mc396.mail.yahoo.com/mc/[email protected]> > writes: > During the course of the class, the instructor showed several "examples" of items taken from both these labs as possible items which were "unsafe". This is about par for the course for 'instructors'. They do go by the book - they aren't trained to deviate from it. It is obvious that testing laboratories with highly-trained specialist staff need special treatment. I don't know how that can be achieved in USA, but in Britain it involves contacting the relevant authority at a senior level, thus by-passing the normal 'foot soldiers'. In fact, many such authorities direct ALL incoming enquiries initially to a senior level, because catching the special cases at the beginning leads to a much quieter life! -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Things can always get better. But that's not the only option. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <http://us.mc396.mai .yahoo.com/mc/[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <h tp://us.mc396.mail.yahoo.com/mc/[email protected]> > Mike Cantwell <[email protected] <htt ://us.mc396.mail.yahoo.com/mc/[email protected]> > For policy questions, send mail to: Jim Bacher: <[email protected] <http: /us.mc396.mail.yahoo.com/mc/[email protected]> > David Heald: <[email protected] <http:/ us.mc396.mail.yahoo.com/mc/[email protected]> > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
