Hi All, The committee chair for that group would be Bernd Jaekel of Seimens. I've copied him on your question.
Regards, Ken Wyatt Technical Services, LLC 56 Aspen Dr. Woodland Park, CO 80863 Email: [email protected] Web: www.emc-seminars.com LinkedIn: http://www.linkedin.com/in/kennethwyatt (719) 310-5418 On May 18, 2009, at 6:08 AM, MIke Hurley wrote: Ian, I agree it probably is wrong, but it was the same in the earlier 1997 edition! I guess this is one for John to pass on to the relevant committee Mike Hurley Gordon,Ian wrote: All There seems to be a typographical error in Table 3 of the above standard where the levels specified for ESD testing in controlled environments are given as 4kV/8kV (air/contact). However the level for the same test given in Table 1 which refers to Basic Immunity Requirements is only 4kV/4kV (air/contact). This seems wrong since the controlled EM environment would be inherently less severe. Does anyone else believe this to be the case? Ian Gordon --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- The contents of this email and any attachments are confidential and are provided solely for the use of the intended recipient(s). If you are not the intended recipient, you are hereby notified that any copying, disclosure, distribution, or use of this e-mail, its attachments or any information contained therein is unauthorized and strictly prohibited and you should please contact the sender immediately and delete this e-mail and any attachments from your system. No responsibility is accepted for any virus or defect that might arise from opening this e-mail or attachments, whether or not it has been checked by anti-virus software. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> <mailto:[email protected]> Mike Cantwell <[email protected]> <mailto:[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> <mailto:[email protected]> David Heald: <[email protected]> <mailto:[email protected]> ________________________________ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.329 / Virus Database: 270.12.32/2119 - Release Date: 05/17/09 16:58:00 -- Mike Hurley Director Mead testing ltd [email protected] www.meadtest.com phone 44 (0) 1279 635865 fax 44 (0) 1279 635874 Mead Testing Limited is a company registered in England with company number 4572600 whose registered office is: Unit 25 Mead Park, River Way, Harlow, CM20 2SE. VAT number: 802 3904 59 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
