All
There seems to be a typographical error in Table 3 of the above standard
where the levels specified for ESD testing in controlled environments
are given as 4kV/8kV (air/contact). However the level for the same test
given in Table 1 which refers to Basic Immunity Requirements is only
4kV/4kV (air/contact). This seems wrong since the controlled EM
environment would be inherently less severe.
Does anyone else believe this to be the case?
Ian Gordon
--- --- --- --- --- --- --- --- --- --- --- --- ---
The contents of this email and any attachments are confidential and are
provided solely for the use of the intended recipient(s).
If you are not the intended recipient, you are hereby notified that any
copying, disclosure, distribution, or use of this e-mail,
its attachments or any information contained therein is unauthorized and
strictly prohibited and you should please contact the
sender immediately and delete this e-mail and any attachments from your system.
No responsibility is accepted for any virus or defect that might arise from
opening this e-mail or attachments, whether or not
it has been checked by anti-virus software.
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
