Richard, For a new application, the required document per the FCC is listed under Section 2.1033 of FCC Rules (or 47 CFR 2.1033). IC has a similar requirement (RSP-100, RSS-Gen). Please note IC doesn't accept "-" within the unique product number. For permissibe change, if you are not the certificate holder, you may have to change the identifier. FCC allows changing the FCC identifier and permissive change being submitted together. Please refer to FCC KDB 513465, FCC 2.933, FCC 2.1043. A similar process applies to IC (multiple listing). In addition to an authorization letter(s), you may need to obtain Schematics, Block Diagram, and Theory of Operation from the provider. If the changes only apply to the receiver portion of the module and the module is not a computer peripheral, Class I Permissive Change may apply. This means equipment authorization of verification applies. For EU, it is self declaration (learned from members). I hope this helps. Regards, Grace
On 3/30/09, Gartman, Richard <[email protected]> wrote: I am in need of some guidance … We have an 802.11 B/G wireless product (an access point). One of our major sub-assembly suppliers is changing the module they provide. We have tested the new module in our product for emissions and it exceeds the performance of the previous unit. As a result the engineers want to change to this new module. What paper work (and supporting test documentation) is necessary for filing with the FCC, IC and European agencies for this type of change? Thanks W. Richard Gartman, MS, CSP Product Stewardship Manager Texas Instruments, Education Technology 7800 Banner Drive, Dallas, Tx 75251 Office: 972-917-1636 Email: [email protected] <mailto:[email protected]> Fax: 972-917-0668 URL: www.education.ti.com <http://www.education.ti.com/> www.education.ti.com/us/productstewardship <http://education.ti.com/us/productstewardship> P Please consider the environment before printing this email. There is only one earth - don't waste it. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
