Peter,
Are you sure you want a “single box solution”? You most likely already have a Power Meter and Signal Generator in your lab that will do the job. All you need in addition is a small amp, CDNs, and maybe a current probe (for auto-leveling). The CDNs and probes would not be part of the “single box” anyway. Software? If you have Labview or Visual Basic you could write something up in a day. The test is not difficult. You will need a fixture to calibrate your CDNs. Not much more to it. This is probably one the easiest EMC test to obtain equipment for, setup and perform. The Other Brian ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, February 10, 2009 8:43 PM To: [email protected] Subject: EN61000-4-6 test equipment Hello group, I am looking to purchase a single box solution for the above standard (Conducted immunity) to do some ITE products. Can someone recommend me a manufacturer? You can do that off line if you do not wish to copy the group. thanks Peter ________________________________ A Good Credit Score is 700 or Above. See yours in just 2 easy steps! <http://pr.atwola.com/promoclk/10000007 x1218694775x1201253752/aol?redir=http:/ www.freecreditreport.com/pm/default.asp ?sc=668072%26hmpgID=62%26bcd=febemailfooterNO62> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> _________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
