Re: [PSES] Calibration practice for EMI test transducers

[Cortland Richmond]

I recently had occasion to verify on an 8591EM generic factors for an 
EMCO current clamp during pretest, and used its tracking generator to 
see if with a short wire the result was a straight line on the screen. 
That simply called for paying attention to 1/BW.

Cortland
KA5S

On 12/5/2011 5:33 PM, Ken Javor wrote:
If an antenna, current probe or other transducer is going to be calibrated
over its frequency range of operation, what determines the step sizes
between measured frequencies, or if swept, what determines the density of
test points reported?

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion 
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>