Dear Experts, Two methods are mentioned in the standard - constant power calibration and constant field strength calibration.
Is there a preferred method (benefits?) of one over the other? If yes, why? What would be the considerations to use constant field strength instead of constant power? Is it related to the equipment setup? Our system integrator recommended constant power method because he is, as he claimed, more familiar with it. Although both achieved the same purpose, what are the engineering differences between them? Sent from Wendy.Nya iPhone - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
