Always one to buck the trend, I think these are reasonable prices We are ripped off by standards bodies left right and centre
MHO Derek Sent from my iPhone On May 8, 2012, at 10:05 AM, "McInturff, Gary" <gary.mcintu...@esterline.com> wrote: > Would appear the real pirates are at UL and BSI > > Gary > > From: Don Gies [mailto:don.g...@alcatel-lucent.com] > Sent: Tuesday, May 08, 2012 6:25 AM > To: EMC-PSTC@LISTSERV.IEEE.ORG > Subject: Re: [PSES] e-standard.org "The cheapest standards in the world" > > Ahoy, me hearties! > > My view is that there are too many standards that are too cheap at this site, > and if ANSI were really powering it, they would be doing so from their own > site. This site might as well hoist high the Jolly Roger, because it’s > occupied by pirates. > > Ex.: UL 60950-1 for $20 instead of $422? > BS EN 60950-1 for $20 instead of £161 to BSI Members, £322 to > non-members? > > > DON GIES > ALCATEL-LUCENT > SENIOR PRODUCT COMPLIANCE ENGINEER > BELL LABS - GLOBAL PRODUCT COMPLIANCE LABORATORY > 600-700 Mountain Avenue > Room 5B-104 > Murray Hill, NJ 07974-0636 USA > Phone: +1 908 582 5978 > Fax: +1 908 582 0582 > don.g...@alcatel-lucent.com > MEMBER, ALCATEL-LUCENT TECHNICAL ACADEMY > > From: Crane, Lauren [mailto:lauren.cr...@kla-tencor.com] > Sent: Monday, May 07, 2012 5:29 PM > To: EMC-PSTC@LISTSERV.IEEE.ORG > Subject: e-standard.org "The cheapest standards in the world" > > Does anyone have experience with the subject standards vendor. > > Their prices are so low (NFPA 70-2011 for $25!?) it has activated all my “if > it’s too good to be true” warning systems. > > Regards, > Lauren Crane > KLA-Tencor > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>