Richard, To be clear, what "problem" and "subject correctly" are you referring to? The IEC 61010-1 3rd Ed problem is specifying a test voltage of 0.9xclamping voltage. From memory Edition 1 of IEC 62368-1 never specified a test voltage of this level. Yes IEC 62368-1 had a twice AC mains safety test, which links with the twice AC mains test level of IEC 61010-1 3rd Ed. If IEC 62368-1 doesn't have a test level of 0.9xclamping voltage, then, yes, it doesn't have that problem. What is the "subject correctly" you are referring to; Varistors, safety testing or hipot testing?
Best Regards Mick > Would you like to check the latest draft of IEC 62368-1 to see if it > treats the subject correctly? With respect to this problem, yes, IEC 62368-1 treats the subject "correctly." Best regards, Richard Nute - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
