I am looking for suggestions for commercial (UL, CSA, etc) standards that might apply to ITE & RF rack mounted equipment, antennas, all mounted on a flatbed trailer. As mentioned most of the hardware is ITE with the more typical safety standards applied. Once those products get hard mounted to a trailer and are now in a mobile mode what other standards are applicable. For the record this devices utilized commercial power 208/120V and as such NEC rules should also apply, or do they? At this time my primary focus is not the RF safety but rather the safety of a mobile trailer.
Thanks Rick Busche - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
