1) Are there any major differences between China's GB 9706.1-2007 Medical electrical equipment - part 1 General requirements for safety and the base IEC document on which it is based?
The customer ran a 3,000 volt Dielectric withstand test on a 5 volt hand held secondary device. It failed at that point and the claim is that the 3k is required for Chinese safety. I think they are off a column based on 60601-1. They seem to be looking at the mains connected equipment and not 5 volt secondary stuff. Without the exact standard in my hand I can't verify that. 2) We are in the planning stages for next year's training budget and I would like to throw in the cost for the EMC symposium. Does anybody have the entry fee and any idea where it will be held this year. Thanks Gary McInturff Reliability/Compliance Engineer Esterline Interface Technologies Featuring ADVANCED INPUT, MEMTRON, and LRE MEDICAL products 600 W. Wilbur Avenue Coeur d'Alene, ID 83815-9496 Office:208-635-8306 Cell: 509 868 2279 Toll Free: 800-444-5923 X 1238 [email protected]<mailto:[email protected]> www.esterline.com/interfacetechnologies<http://www.esterline.com/advancedinput> Technology, Innovation, Performance... - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
