Hi Gary, As to 2), the EMCS is in Denver this year.
http://www.emc2013.org/ No registration page, yet, but the fees normally are similar, year-on-year, withinnominal budgetary accuracy. See here: http://2012emc.org/index.php?id=9 Mike Violette Washington Laboratories & American Certification Body [email protected] +1 240 401 1388 On Oct 31, 2012, at 4:30 PM, McInturff, Gary wrote: > 1) Are there any major differences between China’s GB 9706.1-2007 > Medical electrical equipment - part 1 General requirements for safety and the > base IEC document on which it is based? > The customer ran a 3,000 volt Dielectric withstand test on a 5 volt hand held > secondary device. It failed at that point and the claim is that the 3k is > required for Chinese safety. I think they are off a column based on 60601-1. > They seem to be looking at the mains connected equipment and not 5 volt > secondary stuff. Without the exact standard in my hand I can’t verify that. > > 2) We are in the planning stages for next year’s training budget and I > would like to throw in the cost for the EMC symposium. Does anybody have the > entry fee and any idea where it will be held this year. > Thanks > > > Gary McInturff > Reliability/Compliance Engineer > > > > Esterline Interface Technologies > Featuring > ADVANCED INPUT, MEMTRON, and LRE MEDICAL products > > 600 W. Wilbur Avenue > Coeur d’Alene, ID 83815-9496 > Office:208-635-8306 > Cell: 509 868 2279 > Toll Free: 800-444-5923 X 1238 > [email protected] > > > www.esterline.com/interfacetechnologies > > Technology, Innovation, Performance... > > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
