Amund Power Supply is prescribed and must undergo a certification process.
EUT is not perscribed and does not have to undergo a certification process. It must however meet AS/NZS 3280 which is very similar to the LVD. One way to comply is to use a standard such as AS/NZS 60950.1 Best Regards Peter Sent from my iPhone Peter S. Merguerian pe...@goglobalcompliance.com Go Global Compliance Inc. www.goglobalcompliance.com (408) 931-3303 On Mar 8, 2013, at 4:32 AM, "Amund Westin" <am...@westin-emission.no> wrote: > Is safety testing for Australian market according to AS/NZS 60950.1 > mandatory, even if the product is powered with 24VDC? I have been told so …. > > > To be more precise: > The product (EUT) gets it power 24VDC/0.1A from an AC/DC (230VAC/24VDC) power > supply, which is IEC60950-1 tested and approved (CB scheme). > If the EUT has to be tested according to AS/NZS 60950.1, then the Australian > requirements differ a lot from the LVD in Europe. > > > Anybody who knows the Australian safety rules? …. > > > Cheers, > Amund > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>