Yes indeed Peter.
Best regards, Kevin Richardson Stanimore Pty Limited Compliance Advice & Solutions for Technology (Legislation/Regulations/Standards/Australian Agent Services) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@stanimore.com or kevin.richard...@ieee.org URL: www.stanimore.com Confidentiality This material (this email including all attachments) may contain confidential and/or privileged information intended to be read or used by the addressees only. If you are not one of the intended recipients or you have received this material in error, any copying, disclosure, distribution, use of or reliance upon this material is prohibited. Please immediately notify Stanimore Pty Limited and delete/destroy all copies (electronic and hardcopy) of this email and all attachments. While the sender tries to ensure the accuracy of the information contained in this material, Stanimore take no responsibility for any actions taken as a result of receiving this material or for any consequence of its use. From: Peter Merguerian [mailto:pmerguerian2...@yahoo.com] Sent: Tuesday, 12 March 2013 12:33 AM To: Kevin Richardson Cc: Amund Westin; <EMC-PSTC@LISTSERV.IEEE.ORG> Subject: Re: [PSES] AS/NZS 60950.1 - Austrlian safety requirements Kevin Thanks for the correction. Too many standards to remember and no mobile app yet to facilitate the life of a traveling regulatory compliance professional. Sent from my iPhone Peter S. Merguerian pe...@goglobalcompliance.com Go Global Compliance Inc. www.goglobalcompliance.com (408) 931-3303 On Mar 11, 2013, at 12:36 AM, "Kevin Richardson" <kevin.richard...@ieee.org> wrote: Amund, Peter is essentially correct except that he meant to say AS/NS 3820 instead of AS/NZS 3280. Best regards, Kevin Richardson Stanimore Pty Limited Compliance Advice & Solutions for Technology (Legislation/Regulations/Standards/Australian Agent Services) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@stanimore.com or kevin.richard...@ieee.org URL: www.stanimore.com Confidentiality This material (this email including all attachments) may contain confidential and/or privileged information intended to be read or used by the addressees only. If you are not one of the intended recipients or you have received this material in error, any copying, disclosure, distribution, use of or reliance upon this material is prohibited. Please immediately notify Stanimore Pty Limited and delete/destroy all copies (electronic and hardcopy) of this email and all attachments. While the sender tries to ensure the accuracy of the information contained in this material, Stanimore take no responsibility for any actions taken as a result of receiving this material or for any consequence of its use. From: Amund Westin [mailto:am...@westin-emission.no] Sent: Friday, 8 March 2013 8:33 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] AS/NZS 60950.1 - Austrlian safety requirements Is safety testing for Australian market according to AS/NZS 60950.1 mandatory, even if the product is powered with 24VDC? I have been told so …. To be more precise: The product (EUT) gets it power 24VDC/0.1A from an AC/DC (230VAC/24VDC) power supply, which is IEC60950-1 tested and approved (CB scheme). If the EUT has to be tested according to AS/NZS 60950.1, then the Australian requirements differ a lot from the LVD in Europe. Anybody who knows the Australian safety rules? …. Cheers, Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
