Kevin Thanks for the correction. Too many standards to remember and no mobile app yet to facilitate the life of a traveling regulatory compliance professional.
Sent from my iPhone Peter S. Merguerian [email protected] Go Global Compliance Inc. www.goglobalcompliance.com (408) 931-3303 On Mar 11, 2013, at 12:36 AM, "Kevin Richardson" <[email protected]> wrote: > Amund, > > Peter is essentially correct except that he meant to say AS/NS 3820 instead > of AS/NZS 3280. > > Best regards, > Kevin Richardson > Stanimore Pty Limited > Compliance Advice & Solutions for Technology > (Legislation/Regulations/Standards/Australian Agent Services) > Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) > Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) > Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) > Email: [email protected] or [email protected] > URL: www.stanimore.com > Confidentiality > This material (this email including all attachments) may contain confidential > and/or privileged information intended to be read or used by the addressees > only. If you are not one of the intended recipients or you have received > this material in error, any copying, disclosure, distribution, use of or > reliance upon this material is prohibited. Please immediately notify > Stanimore Pty Limited and delete/destroy all copies (electronic and hardcopy) > of this email and all attachments. While the sender tries to ensure the > accuracy of the information contained in this material, Stanimore take no > responsibility for any actions taken as a result of receiving this material > or for any consequence of its use. > > > From: Amund Westin [mailto:[email protected]] > Sent: Friday, 8 March 2013 8:33 PM > To: [email protected] > Subject: [PSES] AS/NZS 60950.1 - Austrlian safety requirements > > Is safety testing for Australian market according to AS/NZS 60950.1 > mandatory, even if the product is powered with 24VDC? I have been told so …. > > > To be more precise: > The product (EUT) gets it power 24VDC/0.1A from an AC/DC (230VAC/24VDC) power > supply, which is IEC60950-1 tested and approved (CB scheme). > If the EUT has to be tested according to AS/NZS 60950.1, then the Australian > requirements differ a lot from the LVD in Europe. > > > Anybody who knows the Australian safety rules? …. > > > Cheers, > Amund > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
