Commonly found in your favorite fuse manufacturer's section for PV fuses, where most are rated for 1kVdc and above.
Note that the design and sizing of these fuses are intended for article 690, so you need to verify what article of the code would apply to your stuff and evaluate. Brian -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Binayak Marahatta Sent: Friday, June 28, 2013 8:38 AM To: [email protected] Subject: Does 700 VDC voltage category enough for our 840 VDC units ? Hello Intelligent group, The maximum DC bus voltage on our units is 840 VDC. I found UL recognized DC 700 V category fuses and rated current starting from 35 A to 315 A. Could anyone suggest 700 VDC voltage category enough for our 840 VDC units? Thank you. Best regards, Bin - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
