The voltage rating on a fuse, if I remember correctly, addresses the ability of the voltage source to arc across the gap formed when the fuse ruptures and the 700 V rating would be insufficient in an 840 V circuit.
Gary From: Binayak Marahatta [mailto:[email protected]] Sent: Friday, June 28, 2013 8:38 AM To: [email protected] Subject: [PSES] Does 700 VDC voltage category enough for our 840 VDC units ? Hello Intelligent group, The maximum DC bus voltage on our units is 840 VDC. I found UL recognized DC 700 V category fuses and rated current starting from 35 A to 315 A. Could anyone suggest 700 VDC voltage category enough for our 840 VDC units? Thank you. Best regards, Bin ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ KEB products are Control Technology,Inverters, Converters, Servo systems,Frequency generators,Communication, EMC, Magnetic Technology, Motor and Gears, Elevator Technology, Medical Technology, Material Technology, Automotive etc. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ This e-mail, and any attachment to it, contains confidential information that may be legally privileged and which is intended only for the addressee(s) named above. Any use by an unintended recipient is strictly prohibited. If you have received this e-mail in error, please contact the sender and delete it from your system. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
