Hi
Im trying to find a test equipment that can be used for the EN 60601-2-2 §201.8.8.3.103 ACTIVE ACCESSORY HF dielectric strength. Test data is; 7.2 kV, Crest factor 5.4 6.6, Frequency 300 500kHz Normally I use a signal generator with modulation (to control crest factor) a AR HF amplifier and a HV transformer. But the only transformers I can get is only rated 100kHz so I need to drive them very hard to get a 300kHz signal through, and thereby I have now blown 8 transformers over the last 2 years. A good HV HF transformer could also be an option, but they dont seem to be standard product and a local transformer manufacturer could not make one for me. (the primary impedance shall be higher than normal) Where can I get a tester or a transformer? Best regards Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bolls.dk - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>