In message <[email protected]>, dated Sat, 22 Feb 2014,
John Woodgate <[email protected]> writes:
I'm primarily looking for the safety related components.
Guidelines can only be so general that they probably don't help you at
your stage. Instead you need to develop further the skill of detecting
safety-critical parts in each product. Look at each part and think 'How
can it fail? What if it does (for each way it can fail)?
I should have added, but I'm sure you know, is that a failure that does
not make the product unsafe is of no significance for compliance with
safety standards and regulations, even if the resulting damage makes the
product unusable and unrepairable.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
