Hello, I am trying to find out an accredited calibration lab capable of calibrating my Leakage (Touch) Current Measurement Instrument according to the latest IECEE Operational Document, CTL-OP 113 Ed. 1.1, that is:
-conformance with IEC 60990:1999 -verification of input impedance to IEC 60990:1999 (fig. 4)over the frequency range of 20 Hz to 1 MHz - calibration of both RMS and peak voltages over the frequency range 20 Hz to 1 MHz. Any suggestion or experience with the calibration of this meters? Thanks Daniele Conforti Indesit Company SpA E-Mail Notice and disclaimer. This e-mail (including any attachment) is intended for the addressee named above only. As it may contain confidential or privileged information you are not allowed to copy, forward, disclose or use any part of the message or its attachments if it is not STRICTLY required by your job purpose. If you are not the addressee named you may not copy, forward, disclose or use any part of the message or its attachments. If you received this message by mistake, please notify the sender immediately returning the e-mail and deleting it from your system. Internet communications cannot be guaranteed as secured or error-free as information could be intercepted, corrupted, lost, late or contain viruses. The sender therefore does not accept liability for any errors or omissions in the context of this message which arise as a result of Internet transmission. Please note that any opinion or view expressed in this e-mail may be those of the author and do not necessarily reflect the opinion or view of this organization. In no case, an e-mail containing in the address words as stage, consultants or contractors may be considered as sent by a staff member of Indesit Company SpA (and its subsidiaries). Indesit Company has adopted a Business Ethics Code (available at http://www.indesitcompany.com/inst/en/suppliers/note_legali/note_legali.jsp) and aims that its providers, clients and stakeholders share the same principles and rules contained therein Indesit Company SpA Viale A. Merloni 47 - 60044 Fabriano (AN), Italy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
