In message <[email protected]>,
dated Tue, 20 May 2014, Charlie Blackham <[email protected]>
writes:
But these are valid in Britain only, not Europe-wide
Yes, but there is (meant to be) co-ordination between enforcement
bodies.
It's NOT the percentage that matters; it's the actual mass of toxin. As it is,
(1.1*X)% in a 1 g part is not allowed but X% of a 10 kg part
IS allowed.
Most EEE isn't going to have 10kg of homogenous material
I don't really think that's the point. Make it 1 kg or 100 g, it's still
not sensible.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
