Good People, Per OSHA and 29CFR1910, the images for the various marks shall be registered. For the third time, yet another NRTL has mandated a mark change where there is no record of the image in the OSHA database for registered NRTL marks. Previously, an NRTL has issued a change notice so an ECO was issued to update marking labels. After questioning the NRTL about the 'official' mark, they said "never mind, just use the old marks", so we had to eat several rolls of useless labels.
Am at these same cross-roads - agency demanding that I change NRTL mark image on labels where there is no official image in the OSHA database. Sent a message to OSHA requesting clarification, but no answer. Any ideas on what OSHA officials would be appropriate for escalation of this issue? Thanks, Brian - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
