Hi Brian, Old adage, if it ain't written down, it doesn't exist. Same fight over a design change that is not supported by a clause to interpret.
Scott - the retired one > On Sep 29, 2014, at 3:19 PM, Brian Oconnell <[email protected]> wrote: > > Good People, > > Per OSHA and 29CFR1910, the images for the various marks shall be registered. > For the third time, yet another NRTL has mandated a mark change where there > is no record of the image in the OSHA database for registered NRTL marks. > Previously, an NRTL has issued a change notice so an ECO was issued to update > marking labels. After questioning the NRTL about the 'official' mark, they > said "never mind, just use the old marks", so we had to eat several rolls of > useless labels. > > Am at these same cross-roads - agency demanding that I change NRTL mark image > on labels where there is no official image in the OSHA database. > > Sent a message to OSHA requesting clarification, but no answer. Any ideas on > what OSHA officials would be appropriate for escalation of this issue? > > Thanks, > Brian > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
