The final product will be tested according to IEC/EN61010-1 (measurement, control, and laboratory use).
To power this product, an open frame AC/DC power will be uses and it holds a CB certificate according to IEC/EN60950-1. Will we run into trouble with this configuration? In the past, the final product was powered by a medical PSU (IEC/EN60601-1). I would like to switch to the 60950-1 PSU if possible …. #Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
