Networked standby means a condition in which the equipment is able to resume a function by way of a remotely initiated trigger from a network connection. Based on this definition, the following fall into the regulated area.
1. Wake-on via IR/Bluetooth/Wifi remote control - the most common way used with products having a standby mode. It should have been fallen into EU 1275 already. 2. Wake-up through HDMI 3. Wake-on wired or wireless LAN & WAN 4. Wake-up via AirPlay For networked standby, it allows a higher standby power of 6 W vs current 0.5 W for off-mode or standby mode. Networked standby regulation is an amendment to the current Ecodesign regulation EU 1275/2008 on Standby and Off-mode power consumption. Does EU 1275/2008 exclude the networked equipment in scope? Is point 1 above not considered as a wireless network and why? Thanks, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
