In message
<64D32EE8B9CBDD44963ACB076A5F6ABB026D18D3@Mailbox-Tech.lecotech.local>,
dated Tue, 3 Mar 2015, "Kunde, Brian" <[email protected]> writes:
Is there a free on-line reference showing acceptable methods for ground
bonding? Screws vs studs? How to properly stack ground bond lugs on to
a single stud? Lock washers, star washers, lugs with serrated edges,
screws with serrated heads, etc..? Something like this would be most
helpful. I recall seeing this kind of information in the back of safety
standards we used years ago.
It's still in many current IEC/EN safety standards.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
When I turn my back on the sun, it's to look for a rainbow
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
