In message <[email protected]>, dated Thu, 14 May 2015, Doug
Powell <[email protected]> writes:
My question is this. If the RF generated inside the oven does not stop
prior to the opening of the RF seal on the door, which testing is
responsible to identify this problem, EMC or the Safety testing
Not 'either/or': emission with the door open violates CISPR 11/EN 55011,
it's also a violation of the Section of IEC/EN 60335-2 (too late here to
look it up) and potentially a violation of the regulatory EMF exposure
limits as measured according to IEC 62233.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
When I turn my back on the sun, it's to look for a rainbow
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
