This isn't a particularly helpful contribution, but when I use my microwave (used correctly, with the door closed), my Bluetooth speaker completely stops working and any WiFi activity grinds to a halt.
I try to keep the kids away from the microwave when it's in use, as much as I can. Michael. -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: 14 May 2015 23:42 To: [email protected] Subject: Re: [PSES] Interference Caused by Microwave Oven In message <[email protected]>, dated Thu, 14 May 2015, Doug Powell <[email protected]> writes: >My question is this. If the RF generated inside the oven does not stop >prior to the opening of the RF seal on the door, which testing is >responsible to identify this problem, EMC or the Safety testing Not 'either/or': emission with the door open violates CISPR 11/EN 55011, it's also a violation of the Section of IEC/EN 60335-2 (too late here to look it up) and potentially a violation of the regulatory EMF exposure limits as measured according to IEC 62233. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk When I turn my back on the sun, it's to look for a rainbow John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
