Thanks for reminding me. I remember now, the published OJ harmonized standards lists will have the in force date listed for each standard. Thanks -Dave
-----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Monday, July 20, 2015 9:02 PM To: [email protected] Subject: Re: [PSES] R&TTE OJ listing vs conflicting Reference Standards in EN 301 489-1 v1.9.2 In message <bn3pr0801mb09797f0e4351fc2be25f6e0985...@bn3pr0801mb0979.namprd08.prod.o utlook.com>, dated Mon, 20 Jul 2015, "Nyffenegger, Dave" <[email protected]> writes: >At the risk of going off topic, I don't see anything identified at >http://eur-lex.europa.eu/homepage.html for harmonized standards for >the new 2014/30/EU EMC and 2014/35/EU LVD directives that go into force >April 2016. Time to start getting prepared. Am I missing something or >is it just too soon for them to be published? You are not missing anything. The reason you haven't seen anything yet is complicated and largely irrelevant. The lists will not change significantly due to the changes of Directive alone. > >The same line of thinking could apply as to whether or not to start >using newer standards sooner than later. A benefit would be not having >to go through the cost of additional testing to a newer standard only >months later. You almost never *have* to re-test to a new standard only months later; there is a transition period which is normally 36 months. You can *choose* to apply a new edition of a standard as soon as it is notified in the Official Journal, but you don't have to. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk When I turn my back on the sun, it's to look for a rainbow John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
