There always will be 'accidents' caused by bad products, even those that pass all the tests. From Ford Pintos to toaster ovens to toys, you cannot regulate them out of existence. A percentage will always slip through.
Dennis Ward This communication and its attachements contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient(s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail or attachments(s) are free from computer virus or other defect. Thank you. -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Monday, September 14, 2015 9:04 AM To: [email protected] Subject: Re: [PSES] RF Common Mode Immunity Test Question In message <[email protected]>, dated Mon, 14 Sep 2015, dward <[email protected]> writes: >I for one would never want the US to get into this arena. Too much >regulation in the US as it is. Don’t need more and don’t want more. >I’ll decide what is best for me, not the government. But if you were a manufacture of a product that caused a bad accident due to lack of immunity.... It already happened twice, one in a Danish hospital and once in a fire due to a malfunctioning toast oven. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk When I turn my back on the sun, it's to look for a rainbow John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
