Rich
I'm sorry! I did notice the X when it should have been Y when I received my list copy. I decided to wait to see who was alert enough to correct me. Well done and Thank you. The usual class Y value of 4,700pF presents an impedance of only 1.13 ohms at 30MHz, so it provides a very substantial unbalance to create CM from a neighbour's DM Richard Richard Marshall Laboratories, 30 Ox Lane, Harpenden, Herts., AL5 4HE, UK +44 (0)1582 460815 <http://www.design-emc.co.uk> www.design-emc.co.uk Member of the EMC Industry Association From: Richard Nute [mailto:[email protected]] Sent: 02 April 2016 18:24 To: [email protected] Subject: Re: [PSES] Commom mode current vs. differential mode current and LISN - A device with a single class X capacitor from neutral to ground. Safety standards require the capacitor to be Class Y. Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
