Ghery, Thanks
__________________________ James L. Knighten, Ph.D. EMC Engineer Teradata Corporation 17095 Via Del Campo San Diego, CA 92127 858-485-2537 - phone 858-485-3788 - fax (unattended) From: Ghery S. Pettit [mailto:n6...@comcast.net] Sent: Friday, August 19, 2016 7:50 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] CISPR 35 is published! After 15 years of work in CISPR SC I, the IEC Central Office published CISPR 35 Edition 1.0 on Tuesday, August 16, 2016. The IEC webstore link is https://webstore.iec.ch/publication/25667. ANSI has not made a copy available on their website as of this morning (Friday, August 19). You may now purchase a copy of the standard to see what the requirements are. What is the same as CISPR 24? What has changed? What is new? The full title of the standard is, "CISPR 35:2016 Electromagnetic compatibility of multimedia equipment - Immunity requirements" The abstract, off the IEC webstore page is, "CISPR 35:2016 applies to multimedia equipment (MME) having a rated AC or DC supply voltage not exceeding 600 V. The objectives of this document are: - to establish requirements which provide an adequate level of intrinsic immunity so that the MME will operate as intended in its environment in the frequency range 0 kHz to 400 GHz; and - to specify procedures to ensure the reproducibility of tests and the repeatability of results." The price shown on the IEC webstore is CHF 290, which, when I was in Geneva the beginning of June, is about $290 (the two currencies being about equal at that time). I don't know what the price will be on the ANSI site when they make it available. Happy reading! - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>