John,
I expect that we likely will have a period of time before Amendment 1 comes along. That will be a topic for the agenda for the meeting of CISPR I on 2 November. WG4, which is responsible for the work, isn't even meeting in Hangzhou this year. I suspect it will be at least 3 years before that amendment comes along. But, I hear you. Ghery S. Pettit Vice Chair, CISPR SC I From: John Woodgate [mailto:[email protected]] Sent: Friday, August 19, 2016 11:57 AM To: [email protected] Subject: Re: [PSES] CISPR 35 is published! Don't say that, it'll only encourage them to put out dozens of amendments. (;-) With best wishes DESIGN IT IN! OOO - Own Opinions Only <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. From: Bill Stumpf [mailto:[email protected]] Sent: Friday, August 19, 2016 7:22 PM To: [email protected] Subject: Re: [PSES] CISPR 35 is published! Many thanks and congratulations to the CISPR SC I committee. Bill From: Ghery S. Pettit [mailto:[email protected]] Sent: Friday, August 19, 2016 9:50 AM To: [email protected] Subject: [PSES] CISPR 35 is published! After 15 years of work in CISPR SC I, the IEC Central Office published CISPR 35 Edition 1.0 on Tuesday, August 16, 2016. The IEC webstore link is <https://webstore.iec.ch/publication/25667> https://webstore.iec.ch/publication/25667. ANSI has not made a copy available on their website as of this morning (Friday, August 19). You may now purchase a copy of the standard to see what the requirements are. What is the same as CISPR 24? What has changed? What is new? The full title of the standard is, "CISPR 35:2016 Electromagnetic compatibility of multimedia equipment - Immunity requirements" The abstract, off the IEC webstore page is, "CISPR 35:2016 applies to multimedia equipment (MME) having a rated AC or DC supply voltage not exceeding 600 V. The objectives of this document are: - to establish requirements which provide an adequate level of intrinsic immunity so that the MME will operate as intended in its environment in the frequency range 0 kHz to 400 GHz; and - to specify procedures to ensure the reproducibility of tests and the repeatability of results." The price shown on the IEC webstore is CHF 290, which, when I was in Geneva the beginning of June, is about $290 (the two currencies being about equal at that time). I don't know what the price will be on the ANSI site when they make it available. Happy reading! _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4647/12838 - Release Date: 08/19/16 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> CONFIDENTIALITY NOTICE: This message is intended only for the use of the person or organization to which it is addressed or was intended to be addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, or responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by email and delete the original message immediately . The sender, its subsidiaries and affiliates, do not accept liability for any errors, omissions, corruption or virus in the contents of this message or any attachments that arise as a result of e-mail transmission. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
