Purchase a copy of CISPR 35 and see what it says.  Any summary here of the 
content would be incomplete, at best.  As far as EN 55035 is concerned, I would 
check the CENELEC web site and see what the status is.  Then contact a national 
committee to purchase a copy.

 

Ghery S. Pettit

 

 

From: Robert Dunkerley [mailto:[email protected]] 
Sent: Tuesday, August 30, 2016 12:38 AM
To: [email protected]
Subject: Re: [PSES] CISPR 35 is published!

 

Hi,

 

Is there an estimated date when EN 55035 might be released, and appear in the 
OJ Harmonised Standards list?

 

Are there likely to be any dramatic changes? I think one of the drafts I saw 
had Radiated Immunity E-field go beyond 2.7GHz with spot frequencies at higher 
levels, but the other tests remained (more or less) the same.

 

Thanks,

 

Rob.

 

From: John Woodgate [mailto:[email protected]] 
Sent: 19 August 2016 20:59
To: [email protected]
Subject: Re: [PSES] CISPR 35 is published!

 

Well, it was a joke. Some of my best friends are members of WG4.(;-) I agree 
that practically any new standard or amendment takes at least 3 years to 
publish.

 

Judging by the history of CISPR 32, Amendment 1 of CISPR 35 may well be 
circulated as a record number of fragments.

 

With best wishes DESIGN IT IN! OOO – Own Opinions Only

 <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and 
Associates Rayleigh England

 

Sylvae in aeternum manent.

 

From: Ghery S. Pettit [mailto:[email protected]] 
Sent: Friday, August 19, 2016 8:31 PM
To: 'John Woodgate' <[email protected]>; [email protected]
Subject: RE: [PSES] CISPR 35 is published!

 

John,

 

I expect that we likely will have a period of time before Amendment 1 comes 
along.  That will be a topic for the agenda for the meeting of CISPR I on 2 
November.  WG4, which is responsible for the work, isn’t even meeting in 
Hangzhou this year.  I suspect it will be at least 3 years before that 
amendment comes along.  But, I hear you.

 

Ghery S. Pettit

Vice Chair, CISPR SC I

 

From: John Woodgate [mailto:[email protected]] 
Sent: Friday, August 19, 2016 11:57 AM
To: [email protected]
Subject: Re: [PSES] CISPR 35 is published!

 

Don’t say that, it'll only encourage them to put out dozens of amendments. (;-)

 

With best wishes DESIGN IT IN! OOO – Own Opinions Only

 <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and 
Associates Rayleigh England

 

Sylvae in aeternum manent.

 

From: Bill Stumpf [mailto:[email protected]] 
Sent: Friday, August 19, 2016 7:22 PM
To: [email protected]
Subject: Re: [PSES] CISPR 35 is published!

 

Many thanks and congratulations to the CISPR SC I committee.

 

Bill

 

From: Ghery S. Pettit [mailto:[email protected]] 
Sent: Friday, August 19, 2016 9:50 AM
To: [email protected]
Subject: [PSES] CISPR 35 is published!

 

After 15 years of work in CISPR SC I, the IEC Central Office published CISPR 35 
Edition 1.0 on Tuesday, August 16, 2016.  The IEC webstore link is  
<https://webstore.iec.ch/publication/25667> 
https://webstore.iec.ch/publication/25667.  ANSI has not made a copy available 
on their website as of this morning (Friday, August 19).  You may now purchase 
a copy of the standard to see what the requirements are.   What is the same as 
CISPR 24?  What has changed?  What is new?

The full title of the standard is, "CISPR 35:2016  Electromagnetic 
compatibility of multimedia equipment - Immunity requirements"  The abstract, 
off the IEC webstore page is,

"CISPR 35:2016 applies to multimedia equipment (MME) having a rated AC or DC 
supply voltage not exceeding 600 V. The objectives of this document are:

- to establish requirements which provide an adequate level of intrinsic 
immunity so that the MME will operate as intended in its environment in the 
frequency range 0 kHz to 400 GHz; and
- to specify procedures to ensure the reproducibility of tests and the 
repeatability of results." 

The price shown on the IEC webstore is CHF 290, which, when I was in Geneva the 
beginning of June, is about $290 (the two currencies being about equal at that 
time).  I don't know what the price will be on the ANSI site when they make it 
available.

Happy reading!

 

  _____  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7752 / Virus Database: 4647/12838 - Release Date: 08/19/16

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 




CONFIDENTIALITY NOTICE: This message is intended only for the use of the person 
or organization to which it is addressed or was intended to be addressed, and 
may contain information that is privileged, confidential and exempt from 
disclosure under applicable law. If the reader of this message is not the 
intended recipient, or responsible for delivering the message to the intended 
recipient, you are hereby notified that any dissemination, distribution or 
copying of this communication is strictly prohibited. If you have received this 
communication in error, please notify the sender immediately by email and 
delete the original message immediately . The sender, its subsidiaries and 
affiliates, do not accept liability for any errors, omissions, corruption or 
virus in the contents of this message or any attachments that arise as a result 
of e-mail transmission. Thank you. 

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 

 

  _____  

This email has been scanned for email related threats and delivered safely by 
Mimecast.
For more information please visit http://www.mimecast.com 

  _____  

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

Reply via email to